The Ultimate in Servo Mounts

Setting Boxes

De Luxe Setting Box

Switched Setting Box

This is the setting box that we originally created to set the limits of travel on our servo control boards.

They come complete with a 2m CAT5 cable.

In operation the 2 knobs are used to set up the left and right (top and bottom) limits of travel. Once the desired position is obtained the unit is simply unplugged and the values are then written to the chip.

More details of their operation can be found on the setting instructions for the various boards on our "Downloads" page.

This is a new setting box that we  created to set the limits of travel on our servo control boards, but with a set/run switch on the front panel.

They come complete with a 2m CAT5 cable.

In operation the switch is moved to the "set" position and then the 2 knobs are used to set up the left and right (top and bottom) limits of travel. Once the desired position is obtained the Switch is moved to the "Run"  and the values are then written to the chip.

The unit can then be unplugged once all setting have been done.

This setting box is being phased out in the near future in favour of the newer Switched setting box.

Last stock is available at a good discount.

When they’re gone they're gone